ClickCease
BOOK ONLINE HERE & SAVE 10%
Kenmore Washer Overheating

Kenmore Washer Overheating

If your Kenmore washer is overheating, it can pose safety risks and may also damage the washer itself. Overheating can be caused by several factors, and addressing the issue is essential. Here’s how to handle a Kenmore washer that is overheating:

  1. Check the Water Temperature: Ensure that the hot water inlet valve is not receiving excessively hot water. Sometimes, the temperature of the incoming water may be too high, causing overheating during the wash cycle. Adjust the water temperature if necessary.
  2. Loading Capacity: Overloading the washer with too many clothes can make the machine work harder, which can lead to overheating. Stick to the recommended load capacity for your specific Kenmore washer model.
  3. Check for Blocked Vents: If the vents or air circulation around the washer are blocked, it can cause overheating. Ensure there’s enough space for proper ventilation and that there are no obstructions around the washer.
  4. Cool Down Between Cycles: If you’re doing multiple loads in quick succession, give the washer a brief cooling-off period between cycles. Overheating can occur if the machine is used continuously without a break.
  5. Use the Correct Detergent: Using too much detergent can lead to excessive suds, which can cause the washer to overheat. Use the recommended amount of detergent, and avoid using non-HE (High-Efficiency) detergents in HE washers.
  6. Inspect the Water Inlet Valve: A malfunctioning water inlet valve may allow hot water to enter the machine when it shouldn’t. If the valve is faulty, it can lead to overheating. Inspect and replace the valve if necessary.
  7. Check for Clogs: Make sure that the drain pump and drain hose are not clogged. Blockages can lead to water retention and increased heat during operation.
  8. Cooling Fan: Some Kenmore washers have a cooling fan to regulate temperature. Ensure the fan is functioning correctly. If it’s not, it may need to be replaced.

Always prioritize safety when dealing with overheating appliances. If your Kenmore washer becomes extremely hot to the touch or emits unusual odors during operation, turn it off immediately and unplug it. Address the issue promptly to avoid potential damage and safety hazards.