
Independent repair for Kenmore appliances of every age
Kenmore repairthat lasts.
Kenmore washers, dryers, ranges, refrigerators and dishwashers, new or decades old, fixed in 9 US metro areas.



Old model.
New lease on life.
One code, more than one meaning
Find the model number.
Then read the code.
A Kenmore code can mean one thing on a dryer from one family and another on a dryer from the next. Match the digits before the dot, then look it up.
Kenmore codes by modelOn a 796 front-load Kenmore washer, LE means a motor error; on the 796 top-load (2927) it means the motor's thermal overload protection has tripped. Both guides give the same first move: let the washer stand for 30 minutes, then restart the cycle.
Read the LE checks29 researched washer codes. A code can mean different things on different models, so read it against your own manual.
Laundry, ranges and cold storage
Every Kenmore
in the house.











Send the model number.
We bring the right parts.
What happens after you book.
Model number first.
1Share the model
Type in the number from the label, along with what the appliance does. A photo of the label works too.
2Diagnose by family
The technician reads the code against your model, finds the failed part and gives you a cost before starting.
3Running again
The new part goes in, the cycle is tested, and you hear what was done.
Read before you wrench.
Learn your model.
All Kenmore guides
Where it lives. What it does.
Model-number words
Decode the label.
- Washer drain pump filter
- The 796 front-load washer has a drain pump filter behind a small access panel. It catches lint, buttons, keys and coins before they reach the pump. When the washer drains slowly or not at all, the guide’s list starts with the drain hose and then this filter.
- Dryer lint filter
- The lint filter is the screen that catches lint before it reaches the exhaust. Kenmore’s dryer guides say to empty it before every load, and the Elite HE guide lists a clogged lint screen first when clothes dry slowly or the load comes out hot. The 796 guide adds a periodic wash.
- Refrigerator water filter
- This cartridge treats the water on its way to the dispenser and the ice maker. Kenmore’s refrigerator guides say to replace it about every six months, when the indicator comes on, when dispenser output drops or when the ice cubes get smaller than normal.

In your neighborhood
Nine metro areas.
Every Kenmore welcome.
- Tampa Bay
- Orlando
- Miami / South Florida
- New York Metro
- Houston
- Chicagoland
- Los Angeles
- San Diego
- SF Bay Area
A clear price, before the work.
After the technician has examined the appliance you are given the cost of the repair, and you decide whether to go ahead.
Care we stand behind.
Covered repairs under a Kenmore manufacturer warranty are handled through Kenmore. We stand behind our own work with a workmanship warranty.
Where do I find my Kenmore model number?
Look for a label on the frame, inside the door or on the back panel. Kenmore model numbers have three digits, a dot, then more digits, and the first three tell us a lot about your unit.
Why does the same Kenmore code mean different things?
Kenmore appliances have been built by several makers, so a code on one model is not always a code on another. That is why we ask for the full model number before anything else.
My Kenmore is 20 years old. Is it worth repairing?
Often it is, because these machines were built for long service and many still run well. The technician will tell you what failed and whether the repair makes sense before any work starts.
Are you Kenmore or Sears?
No. We are an independent repair company and have no tie to Kenmore or to any store that sells it. Our name is on the work and on the warranty.
Can you get parts for an older Kenmore?
In many cases yes. Parts for a model are matched by its number, and manufacturer parts are available on order, so send the number with your request.